J1939 9 Pin 9pin Threaded Connector to OBD 2 OBDII 16 Pin 16pin Splitter Y Cable
Specification
| J1939 female connector | equivalent of Deutsch HD16-9-1939S-P080 |
| Type of J1939 female connector | Type 2 |
| J1939 male connector | equivalent of Deutsch HD10-9-1939P-P080 |
| Type of J1939 male connector | Type 2 |
| OBD2 female connector | with KET terminals |
| Wire | 20AWG, pure copper |
| Material of J1939 connector | PA66 + glass fiber |
| Material of OBD2 connector | PA66 |
| Pin assignment or pin out | customized |
| Cable length | customized |
| Pins or terminals | copper, nickel-plated or gold-plated |
| Contact Resistance | 3 ohm max. |
| Insulation Resistance | 5M ohm min. |
| Working Temperature | −25℃ ~ +85℃ |
| Testing | 100% open, short and mis-wire testing |
| Testing Voltage | DC300V 5M ohm/10ms |
| Warranty | 1 year |
The end of J1939 female and male plugs can be overflow molded or not, according to your needs.
Overmolded
Not overmolded
The Deutsch 9 Pin female connector is Type 2, so its Pin F is with smalller diameter as Pin C and Pin J. Type 2 J1939 female connectors can be inserted into Type 1 or Type 2 J1939 male connectors.
The OBD2 female connector is with KET terminals which make the OBD2 female connector more endurable.
Pin assignment or pin out
Generally speaking, the pin assignment or pin out will be like this (4 pins to be connected):
| OBD2 female | Signal | J1939 female | J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
Sometimes, the pin assignment or pin out can also be like this(6 pins to be connected):
| OBD2 female | Signal | J1939 female | J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
| 2 | J1708-H | F | F |
| 10 | J1708-L | G | G |
Sometimes, the pin assignment or pin out can also be like this (6 pins to be connected):
| OBD2 female | Signal | J1939 female | J1939 male |
| 4 or 5 | Ground | A | A |
| 16 | Battery | B | B |
| 6 | J1939, CAN-H | C | C |
| 14 | J1939, CAN-L | D | D |
| 12 | J1708-H | F | F |
| 13 | J1708-L | G | G |
The 6-wire cable also includes wiring for the J1708 lines. If you do not need the J1708 wires, it is better not to connect them as sometimes the added lines can interfere with the operation of some GPS trackers.
The pin assignment or pin out can also be customized according to your needs.
Application
This cable is used to connect telematics or fleet management devices such as GPS Trackers or ELDs to commercial vehicles that have the J1939 9-pin round Deutsch ports.
This cable will also allow OBD2 diagnostic devices or scanners (with the appropriate software) to connect to the round J1939 connector. Bear in mind that most OBD2 software and scanners are based on reading PIDs, which are single parameters. J1939 is a PGN based protocol, where each PGN contains multiple parameters. Your scan tool must be able to handle PGNs if it is to work with this adapter.
Sending an inquiry
If you haven’t found or don’t have time to look for the J1939, OBD2 or J1708 cables, adapters or connectors in our website, feel free to let us know what J1939, OBD2 or J1708 cables, adapters or connectors you need by sending an inquiry (If you have a picture, please attach it in the inquiry). We can also customize any J1939, OBD2 or J1708 cables, adapters or connectors for you.
Skype: orchard.guo (any time to contact)
Product Tags:
|
|
J1939 9 Pin 9pin Threaded Connector to OBD 2 OBDII 16 Pin 16pin Splitter Y Cable Images
|
